jobs.every(Duration.ofMinutes(5), reports::refresh);
jobs.cron("0 0 3 * * *", archive::sweep);
One daemon platform thread keeps time; every job body runs on a virtual thread,
so a slow job delays nothing but its own next run and cannot occupy the timer.
Cron expressions compile once into a bitmask per field — a long for seconds and
minutes, an int for the rest — so matching an instant is a shift and a mask
rather than a parse or a set lookup. Next-fire advances by the largest unit
that cannot match instead of ticking second by second, so a yearly expression
resolves in a few dozen iterations rather than thirty million. Five or six
fields, ranges, steps, lists, named months and weekdays, both Sunday encodings,
and the standard union semantics when both day fields are restricted. A
malformed expression throws when the job is registered, not when it would have
fired.
Overlapping runs are skipped, and deliberately not configurable: two copies of
one job at once is a bug in every case anyone has needed, and a flag would only
let it be set wrongly. A skipped run logs how long the previous one has been
going.
A throwing job is logged and keeps its schedule. scheduleAtFixedRate cancels
the task on first exception, silently — a job that dies at 3am and is never
heard from again is the failure this avoids.
Shutdown goes through FlashContext.onClose, so app.stop() drains HTTP first,
then gives running jobs a grace period before forcing them down. Nothing runs
after the app stops. The grace period is the only knob.
Known ceiling, marked in the source: schedules are per-instance, so two
replicas run every job twice. A distributed lock should not exist until there
is a second replica.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Two frontend layouts, each laid out on disk inside its own application's
configure(). The harness runs that lazily at first access, so @TempDir is
populated by then and the server for whichever test is not running never boots.
Replaces three blocks of HttpRequest.newBuilder(URI.create(...)) per test with
single-line assertions. 98 to 60 code lines.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
McpExtensionIntegrationTest: 10 stateless JSON-RPC calls against one server
config, so one class-scoped server replaces a boot per test. 117 to 85 code
lines.
McpExtensionSecurityTest: the four server configurations it exercises — AUTO
without oidc, REQUIRED with a derived resource identifier, REQUIRED with an
explicit one, and REQUIRED with advertised scopes — become four named servers
sharing one FakeOidcProvider, replacing eight boots and a freePort() helper.
151 to 128 code lines. The boot-rejection test still builds its app directly:
a harness whose job is to boot an app is the wrong tool for asserting that
booting fails.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
First migration, chosen because it is the case that drove the harness design:
a Flash app plus a FakeOidcProvider, with tokens audience-bound to the app's
own port, so the port has to be readable after boot.
Drops the racy free-port dance, the hand-rolled HttpClient plumbing and the
per-test teardown; failures now report the response body. 120 to 106 code
lines, and what remains is tool-policy assertions rather than fixture code.
The two boot-rejection tests keep building their app directly — a harness whose
job is to boot an app is the wrong tool for asserting that booting fails — but
port(0) removes freePort() from those too.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Boots a real app on an OS-assigned port for a test class or a single test and
hands back a client pointed at it:
@RegisterExtension
static FlashTest app = FlashTest.of(new BlogApp())
.mock(UserService.class, new InMemoryUserService());
app.get("/api/users").expectStatus(200).expectBodyContains("alice");
A field rather than an annotation, because annotation values are compile-time
constants and so could never express a second server wired from the first —
FlashTest.of(new BlogApp(auth.baseUri())). Startup is lazy, so reading
baseUri() boots that server on the spot and declaration order does the wiring,
with no dependence on JUnit's extension ordering. A static field boots once per
class, a non-static field once per test; that is stock JUnit field semantics
rather than an option to configure.
Runs against a real loopback port instead of dispatching in-process. An
in-process dispatcher would be a third copy of the routing/handler/exception
sequence that Http1Connection and Http2StreamDispatcher already duplicate, kept
in sync by hand, and it would let a test pass while the status line,
content-length or HPACK encoding was broken.
mock() installs overrides as the last extension, after everything the
application and its extensions declare, so a fake always wins. Any object is
accepted, so a hand-written fake and a Mockito mock are equally welcome and
this module depends on no mocking library — only flash and junit-jupiter-api.
Teardown cancels the client before stopping the server: HttpClient holds
keep-alive sockets open and ServerLifecycle.stop() spins until the last one
closes, so the default 15s drain would otherwise be paid on every test class.
shutdownNow rather than close(), which blocks until every operation completes
and would hang on a leaked WebSocket.
Lives at the top level, not under flash-extensions/, which holds things you
install() onto an app; this carries junit-jupiter-api at compile scope and
nothing installable should.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
FlashRegistrar#any() registers a handler under every HTTP method for
verb-indifferent handlers (e.g. a reverse proxy). OpenApiExtension now warns
when a class-based handler has no @ApiOperation instead of silently omitting
it from the spec. AbstractRouter's default production exception handler now
logs unhandled exceptions server-side instead of only returning a JSON 500.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
HeaderMap was split into the HeaderView interface and Http1HeaderMap
impl in the HTTP/2 model refactor, but two extension-module tests
(flash-ext-jackson, flash-ext-view-jte) still referenced the old
class name, breaking the CI build on master after the HTTP/2 PR merge.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01JCmqb7XGb3JQvCWf589yma
The three data modules' docs were in Italian, so the synchronization contract
added in the previous commit went in as Italian too, to match its file. English
is the project's language for docs, comments and READMEs alike, and a file half
in each is worse than either — so all three are translated, not just the new
section.
Content is otherwise unchanged, except the "synchronizations run on
commit/rollback" line in the two backend READMEs, which was vague before and is
now accurate about which hook sees the session/connection still bound, pointing
at flash-ext-data-core's README for the full contract.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
beforeCommit(boolean) has been part of the TxSynchronization API from the
start and was invoked by nothing, in either manager — anyone implementing it
got silence, the same failure class as the dropped afterCommit callbacks in
the previous commit. Left out of that one because fixing it is a design
decision rather than a restored behaviour; this is that decision, written
down.
It now runs immediately before the real commit, with the transaction still
active and its session/connection still bound, which is the whole reason to
have a hook on this side of the commit: it can still write through the same
resource and land in the same atomic unit. Skipped when the transaction is
already rollback-only, since there is no commit to precede.
Throwing from it vetoes the commit: the transaction rolls back, the surviving
callbacks hear ROLLED_BACK, and the exception propagates. Without that, a hook
running before the commit would be strictly less useful than one running
after. A commit that fails on its own now takes the same path instead of
completing silently with no callback at all, and a rollback that also fails is
attached as a suppressed exception rather than replacing the one that explains
the failure.
Documented on the interface itself and in flash-ext-data-core/docs/README.md:
which hook sits on which side of the commit, what each may still touch, what
throwing does, and the per-transaction scoping rule from the previous commit.
Tests: 6 more (3 per manager) — runs inside the transaction with the resource
still bound, receives the read-only flag, skipped on a rollback-only
transaction, and vetoes the commit when it throws. 37 across the two managers
now, all green, reactor verify passes the 80% Jacoco gate.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Two defects in the same mechanism, both silent.
1. HibernateTxManager#commit fired synchronizations *after* its finally block,
where cleanupIfIdle() had already called ResourceRegistry.cleanup() and
removed the ThreadLocal list holding them. fireSynchronizations() then read
a freshly initialized empty list and did nothing. No afterCommit callback
had ever run on the Hibernate path: no exception, no log, just silence.
rollback() twenty lines below had the order right, which is what makes this
an ordering slip rather than a design choice.
Found in production, from the far end: an admin write landed in Postgres
while the in-memory cache it was registered to refresh never heard about it,
so the change only took effect when the process restarted and re-read the
database at boot.
2. Synchronizations were a single flat per-thread list, fired from index 0 by
whichever transaction completed first. A REQUIRES_NEW inner transaction
therefore fired the *suspended* outer transaction's callbacks too — early,
with the inner transaction's outcome, for a transaction that might still
roll back. Each new transaction now records how many synchronizations were
already registered when it began, and fires only its own tail.
Both managers get the fix and the same callback ordering: unbind the session or
connection first, so a callback that opens its own transaction (a cache reload,
an outbox drain) gets a fresh one instead of joining the transaction that just
committed, then fire, then clean up.
Also fixes JdbcTxStatus rejecting a null connection, which turned the two
propagations that deliberately produce a connectionless status — SUPPORTS with
no active transaction, and NOT_SUPPORTED — into an NPE inside begin(). The
Hibernate manager always allowed it, and resource() already reports the real
mistake with a message that names it.
Tests: 16 new across the two managers, kept deliberately parallel since the two
are interchangeable behind TxManager — synchronization firing, ordering,
per-transaction scoping, callbacks opening their own transaction, and the
previously untested SUPPORTS/NOT_SUPPORTED/MANDATORY propagations. Nothing
covered afterCommit before, which is how both defects shipped.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Its maven-deploy-plugin was configured with <skip>true</skip>, so the
first successful publish-maven.yml run deployed flash-parent, flash,
and every flash-ext-* jar to Gitea's Maven registry, but not
flash-extensions itself — the pom-packaging aggregator every
flash-ext-* submodule's effective POM inherits from via <parent>.
Remote consumers (Pathway's Docker build, resolving flash-ext-* from
the registry instead of a local ~/.m2 install) couldn't resolve that
parent POM and failed with "artifacts could not be resolved:
flash-extensions:pom (absent)".
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Data/RepositoryFactory/HibernateData give applications one cached,
stateless entry point for repositories per entity type instead of
per-request instantiation, with write()/afterCommit() replacing manual
transaction+reload choreography.
McpConfig.rolesClaimPath is removed - MCP now derives the claim path
from OidcMiddleware.rolesClaimPath() so applications never duplicate
the roles-claim config between OIDC and MCP. McpPackageScanner is
rebuilt on the shared PackageScanner.discover(packageName) primitive,
doing only McpTool/McpResource/McpPrompt classification itself.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Streamable HTTP transport (JSON-RPC 2.0 over POST), one-class-per-tool/resource/prompt
API mirroring RequestHandler, boot-time-precompiled schema/list payloads for a zero-alloc
hot path, and optional OAuth2 protection built on flash-ext-oidc (lazy-loaded, RFC 8707
audience binding, RFC 9728 Protected Resource Metadata). Registers the module in the
root and flash-extensions POMs and adds the ext-mcp commit scope to AGENTS.md.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Introduces AssetDirectoryScanner, StaticFrontendStrategy, and WebBundlerBuild for
build-time asset discovery, plus config/docs updates for frontend-type resolution.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
- Move JteStaticServing to dev.relism.flash package
- Fix imports in HttpStatus and test files
- Add fluent config methods to JteExtension (templateRoot, serveStatics, staticPrefix, etc.)
- Implement routes() for static asset serving with HEAD support
- Include Main.java entry point
Zakaria El OrcheandClaude Opus 5
Relism
github-actions[bot]
Relism